Q: How do I arm the theft-alarm system?

asked by on

How do I arm the theft-alarm system?

The theft-alarm system is a very important anti-theft feature in your vehicle. The system will be automatically armed when you turn off the engine, close all of the doors, and lock the vehicle from the outside.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I arm the theft-alarm system?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Hello oil control valve timing solenoid issues

Sometimes you can solve a P0011 by replacing the solenoid, but that is not exactly what the code is for. The code is simply saying that the camshaft timing is too far advanced. The VVT system has some control over...

Q: Q: Car won't start.

Hello. The key you put in the ignition is a code key and may be defective. Try a different key if you have one. If this works, then you need to get extra keys made. If it still does the...

Q: Nut holding stabilizer arm to rear strut won't come off ( it just spins with the bolt ).

Hello. This is where all those DIY skills come into play. This scenario has baffled every car technician at some point in their career, from new to Master Mechanic. What is required is to use whatever is at hand to...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.