Q: Mazda 3 2010 making some noise from one of the back wheels.
Mazda 3 2010 making some noise from one of the back wheels. Guess it has to do with disc (rotor) and the break pads, right? If so, how much does it cost to fix it?
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Front passenger seat won't move backward
Hi. If it moves forward, but not backwards, it is most likely the switch. A few simple checks with a test light can determine what it needs. Make sure there isn’t anything in the track preventing the movement. I’ve seen...
Engine light code P0441
Hello. The P0441 code (https://www.yourmechanic.com/article/p0441-obd-ii-trouble-code-evaporative-emission-control-system-incorrect-purge-flow-by-spencer-clayton) you are getting is for an incorrect purge flow for the evaporative emissions system. Most of the time the problem is the purge valve itself, though it can be a number of other things. I...
What are the steps for bleeding my liberty if I cannot remove the bleeder screw?
The manual states to fill the reservoir up to the fill line with the engine off. Once the coolant is up to the top hot fill line start the engine and see if it drops down in the next couple...
Transmission slipping while downshifting
The shifting may be normal, but there is a software update to change the shifting strategy. Take the vehicle to a dealer and they can update the software for you. If you are out of warranty, then there may be...
My car jerks when decelerating from what seems to be 4th gear to 3rd.
You need to have the codes scanned by a professional with a scan tool for the transmission computer. The codes may give you an indication if the sensor is not performing correctly. If it is not a sensor malfunctioning (like...
Car transmission stuck in Reverse, shifter stuck in Park, Car won't start.
Hello. You will need to look under the vehicle where the shifter cable hooks to the transmission and look at the cable connector end for a worn out bushing. You may be able to push the shift lever on transmission...
Vehicle stalls while turning left.
Hello, and thank you for writing in. The first thing you should do, considering the power steering pump is driven by the drive belt, is make sure the belt tensioner and the drive belt is tight, clean, and dry. If...
2005 Saturn Ion has a hard time starting, indles roughly and then dies.
Hi there. The ticking noise in this case most likely was coming from the cylinder heads (or the top of the engine) and the components inside that were not receiving enough lubricant (oil) as the engine runs. Most of the...
How much cost could be to replace a timing cover gasket on 2011 hyundai sonata 4cly? And the working time expectation?
Hi there. If the gasket in between the timing cover and the engine is leaking, it is recommended to replace the timing cover and gasket at the same time. In many cases, when the gasket becomes damaged, the cover itself...
Related articles
How Often Should I Rotate My Tires?
Tire rotation helps your car perform efficiently and safely. The type of car you drive affects how often you should get your tires rotated.
How to Buy Good Quality Wheel Bearings
Sometimes Sometimes you can get by with a part on your car being in semi-good condition. That is not the case with wheel bearings. They are responsible for supporting the weight of your car and helping to move the wheels...
How to Clean Your Car Tires
When When your car’s wheels are clean, it does more than just enhance your car’s looks. It also protects your tires from weathering and cracking and removes corrosion and protects your wheel’s finish from the elements. Keeping your wheels clean...
Browse other content
Maintenance
Cities