Q: Hazard lights will not go off

asked by on

Hazard lights won't stop blinking

My car has 90000 miles.
My car has an automatic transmission.

Hi there. Check the switch to the hazard lights and see if the switch got stuck. Sometimes the switch tends to stick and make the hazard lights stay on. If the switch is working, then the contacts in the switch have burned and fused together. Remove the fuse and remove the switch and replace it. Then put the fuse back in and the switch and it should normal. If you need further help diagnosing your vehicle, then seek out a professional, such as one from YourMechanic, to assist you with your hazard lights problem.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!
  1. Home
  2. Questions
  3. Hazard lights will not go off

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: HVAC motor blower broken

This can be caused by several things. The blower motor circuit has 3 major components. The switch, the resistor and the motor. Failure of the resistor and the motor are the most common and both can fail at the same...

Q: Q: Fuse keeps blowing

The turn signals are powered in a couple different ways. The brake light fuse and the turn fuse. If either are blown then you will have issues of no turn signal or turn signal stops when you push on the...

Q: 08 camry hybrid. Hybrid battery seems to test ok, I removed the entire pack and load tested each cell, but i still get dash light

Hi there. Typically when a warning light is illuminated on the dash, it is due to an error code being created and stored in the ECU. In most cases, in order for the error light to go away, it needs...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.