Q: Gas to diesel conversion

asked by on

I would like to know if my gas tranny is compatible with a diesel engine that will fit the bellhousing.

A diesel engine has so much more torque than the gas counterpart and I would have to guess the transmission will work but the parts inside are not strong enough to handle the torque of the diesel engine and may damage it in a short time.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Gas to diesel conversion

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Groaning noise in SUV front end

Hello. There are several components that could be causing this problem. The power steering pump, serpentine belt tensioner, serpentine belt pulley, or water pump could be going bad. It is also possible that the compressor clutch is faulty. I would...

Q: Jeep won't shift from second to third

The information provided for your Jeep Grand Cherokee is limited so it is difficult to point you in the right direction. However the symptoms lead me to believe that your vehicle may have put itself in “limp mode”, meaning that...

Q: My transmission seems to be slipping or something else...?

This may be a simple adjustment to the throttle kick down on the transmission. It may be out of adjustment or there may be a problem with the shift solenoids in the transmission. The kick down is a simple adjustment...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...