I have stripped lug nuts that need removal because my tir...


I have stripped lug nuts that need removal because my tire blew out and I have the key for the removal, it just won’t catch on Mechanic's Assistant: When it comes to this particular vehicle, have flat tires been a problem ...

I have stripped lug nuts that need removal because my tire blew out and I have the key for the removal, it just won’t catch on Mechanic's Assistant: When it comes to this particular vehicle, have flat tires been a problem in the past? No Mechanic's Assistant: What is the make/model/year of your car? 2005 Ford Focus ZX4 Mechanic's Assistant: Are you fixing your Focus yourself? What have you tried so far? A friend tried and nothing worked and roadside assistance hasn’t been able to assist me either

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* to Just Answer! I will be assisting you with your questions today. Give me one moment while I review this.
Automotive Expert
I’m very sorry that you’re having this issue and together, we will get this figured out. I will need your help too because I can’t see, touch, hear or smell anything that’s going on with your vehicle. We may also require some specialized testing tools in order to assist us in diagnosing the problems due to the complexity of today’s vehicles. JA will offer a phone call to you at an additional fee, it’s your choice. Please be patient with my replies, I reply back in question order received. If I send you an attachment, I will tell you, BUT, you will NOT get it on a phone; you must be on a tablet or PC. Please let me know when you are satisfied with my answers too so we can close out your question. You will most likely need to tow it to a tire shop or regular shop so they can cut groves in the studs and remove them with an impact wrench. Thanks again and all the best:) Ron
Automotive Expert
Please feel free to text me back if you need any more help. Thanks again and be well:) Ron

What others are asking

Pops and misfires, what would make this happen?
The Check Engine light coming on is an indication that continued operation could cause damage. The engine could also emit excessive emissions. You should have the vehicle's computer scanned for codes. This test will confirm that when the light is...
Fuel leak.
A vehicle can leak fuel from dozens of places. Fuel leaks can also be very dangerous. This is a repair best left to certified technicians, like the ones at YourMechanic. Have this problem diagnosed (https://www.yourmechanic.com/services/75-point-safety-inspection) right away to ensure safety...
Ford Probe GT either revs too high or too low to the point of stalling
I know Fords and a lot of times it is the throttle having problems. So, you either want to clean the throttle yourself (see my video "cleaning the throttle on your car (https://www.youtube.com/watch?v=2uuKy1ZAleo)") or have a mechanic clean the throttle...
Regarding All Wheel Drive
Hi Chrysler 300 owner: With only 20,000 miles on a 2014 Chrysler 300 AWD, you definitely should not be experiencing any jerking type motion while you drive under normal operation. A few of the potential mechanical problems that cause similar...
My car won't detect my car key.
There is a technical bulletin 13-5-32 that covers this problem of no start with any key. The TSB says that the vehicle will need to have the anti-theft system radio transceiver module reprogrammed using the dealer IDS system with the...
my car is misfiring
The DME is a possible failure for the misfire for your 2002 BMW M3. A complete pinpoint test for the codes would need to be done to rule out anything like coils (https://www.yourmechanic.com/services/ignition-coil-replacement) or plugs (https://www.yourmechanic.com/services/spark-plugs-replacement). Your shop replaced the...
If I replace my engine does it have to be the same year?
If you are looking to do an engine swap you should use the same year motor. This way you will not have different sensors and harnesses. Also you may have different exhaust, intakes, and accessories. From one year to another...
Power Steering Pulley Removal
You should check to see if the special power steering tool (http://www.homedepot.com/catalog/productImages/1000/08/0863d45f-163e-493e-88df-fdc9c7245ffa_1000.jpg) looks like this kit. You will need this to remove and install the pulley. This kit is normal for Ford pulley removal and installer.
idler pulley
I think you mean the a/c compressor is seized and not the condenser. You will need to get an a/c compressor bypass kit and the compressor can then be removed and a pulley in its place. The problem is these...