Q: Electrical power steering doesnt work after replacement
My power steering stopped working required a new rack and pinion which we replaced and plugged in anothrr one,the issue is still there i.e loss of power steering.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Car won't start at all - 2000 Nissan Maxima
Regarding the fuse, the high current probably welded the fuse to the fuse holder. YourMechanic can attempt to salvage the assembly by trying a fuse replacement without destroying the fuse terminal box. If you are lucky, putting a new fuse...
car vibrates when driving .
Hello. I will help you with your question relative to the vibration problem you are experiencing with your 2007 Lexus ES350. If the vibration is occurring only during "moderate to strong" acceleration, but not during coasting, it is likely caused...
Won't start after warmed up.
Hello. If the vehicle starts after being allowed to sit for a while, then it may be possible that the issue is heat-related and goes away once the car cools down. If the vehicle will start with starting fluid, then...
Replaced master cylinder and brakes still going to the floor and not working. Bed both master cylinders and each wheel.
If your vehicle has ABS brakes, it is possible that there is an air bubble in the ABS system. Many vehicles require a special bleeding procedure for vehicles with ABS. This will require you to do the bleeding in a...
Creaking while turning, 0-15 and braking 2008 Audi TT
Hello - most likely, these creaking noises (https://www.yourmechanic.com/services/creaking-noise-when-turning-the-steering-wheel-inspection) are coming from the front strut bearing plates. This is a common worn suspension noise, especially in cold weather. I would recommend a front suspension inspection (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) by a mobile, professional mechanic,...
I'm losing power steering after replacing rack and pump
First you need to see that the fluid level is correct. (https://www.yourmechanic.com/article/how-to-check-your-power-steering-fluid-level-by-jerel-lawrence) Bring the engine up to operating temperature and check the fluid at the reservoir. Top it up with Pentosin CHF11 hydraulic fluid. The fluid gets foamy when it...
Wiring Diagram on the Blower motor resistor
Hi Chanel. Since we can't attach images or files on this platform, your best resource is going to be purchasing a service and repair manual for your 2010 Chevrolet Malibu to review the detailed wiring schematic for each mechanical system....
Bleeding the brakes on a 98 dodge ram 2500 4wd 4 wheel abs. I read there are two valves that have to be bled off first?
You should first bleed the brakes normally and then hook up a DRB3 scanner and put ABS in bleed function to bleed out ABS system and then bleed system normally at each wheel again. Repeat as needed until all air...
Related articles
2012 Chevrolet Silverado vs. 2012 Dodge Ram: Which One Should I Buy?
When you are looking for a way to get a load of mulch or gravel, or need to haul a large trailer or boat behind your vehicle, chances are you are looking for a truck. Trucks are not meant to...
The Best Used Cars to Buy If You're an Undercover Cop
If If you're an undercover cop, when you choose a used vehicle, your main purpose is to look like anything but a cop. That means, of course, that an unmarked Crown Victoria is probably not the wisest choice. We’ve evaluated...
The Best Used Cars to Buy If You Love Road Trips
If If you love to travel, comfort is very important in a vehicle. You want a nice, quiet ride, comfortable seating, and enough room. We have evaluated several used vehicles, and narrowed our favorite road trip vehicles down to the...
Browse other content
Cities
Services
Maintenance