Q: Q: Doors not locking

asked by on

My car doors won't lock.

It sounds like you may be having some type of electrical problem. I Would recommend having a technician come out and inspect the electrical components on the four locks and look for a shorted wire or a bad switch on the door.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Doors not locking

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Car stalling when stopped

The codes all reference engine misfires. Continued misfires can cause the catalyst to fail and block the exhaust. The past diagnosis you had that the coils could be bad was correct. The coils and plugs should be replaced first and...

Q: Q: Car will turn over but won't start?

The most common cause of no start on these vehicles is the ignition components inside the distributor causing no spark or sensor reading to computer. Most times replacing the distributor fixes the problem of no spark.

Q: Windshield wipers only work on low

The wiper high setting is controlled through the wiper switch to "ask" the GEM module to turn on the wiper high relay. The most common problem is the wiper switch, but before the switch is condemned, it can be tested...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.