2007 dodge [ram 1500](/topics-ram-1500/) 5.7 hemi lightni...


2007 dodge [ram 1500](/topics-ram-1500/) 5.7 hemi lightning bolt on.. check engine light flashing and the truck won't turn over Mechanic's Assistant: Does the light stay on, or does it blink? Check engine light blinking ...

2007 dodge [ram 1500](/topics-ram-1500/) 5.7 hemi lightning bolt on.. check engine light flashing and the truck won't turn over Mechanic's Assistant: Does the light stay on, or does it blink? Check engine light blinking Mechanic's Assistant: Are you fixing your Ram 1500 yourself? What have you tried so far? It was running a few hours ago. I left for a few hours and came back and it wouldn't crank. I thought [battery](/topics-battery-dodge/) was low because it seems like it need a jump start Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No ma'am

Automotive Expert
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you.. I help many customers, so sometimes my replies are delayed, I will respond once available. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call. You first want to get the battery checked, if its ok you will need to scan for codes and post them here so I can send you a troubleshooter for this.

What others are asking

What is the Front Passenger Sensing system?
While your car has both a driver and passenger front air bag, the passenger side air bag isn’t always active. The Front Passenger Sensing system is designed to turn the passenger front air bag on or off based on several...
How do I set the seat belts in automatic locking mode?
Automatic locking mode is a feature that keeps the seat belts from having any slack. This feature should always be used when attaching a child restraint system. To set the system, follow these steps: 1. Buckle the seat belt. 2....
AC is not blowing cold air
Hi. Generally, a silvery look to the oil indicates metal particles in the oil system. If this occurred when the oil compressor failed and the system was not thoroughly flushed, then the metal particles can wear the pistons and walls...
I went for and oil change, tire rotation, and inspection. Why would they also replaced my rear brakes and pads at 19k miles?
Hi there. From the description you have provided, going in for an oil change, tire rotation, and inspection, being told your vehicle needs rear brakes at 19,345 miles and leaving there $580.00 poorer, makes me cry too! It makes absolutely...
Changed battery twice in 2 weeks, I go to turn on and car is completely dead not even the lights work, what could it be? 2000 Acura TL
Hi there - a repeating "dead battery (https://www.yourmechanic.com/services/battery-is-dead-inspection)" scenario has a couple of possibilities. One possibility is a bad alternator that is not charging properly. With the engine running, the system voltage should be close to 14 volts if the...
No start condition
Hello. If your issues began after you removed the turbo lines then the first thing I would do is go back and make sure that all of the hoses and lines were reinstalled correctly. Any sort of boost or vacuum...
My Toyota Sometimes dies when I break or press the gas very slowly
Common causes of engine stalling and rough idle include a faulty mass airflow sensor, faulty engine coolant temperature switch/sensor (typically at cold start only), worn spark plugs, wires or defective ignition coil(s), inadequate fuel delivery or pressure (clogged fuel filter,...
hi chris, which other VW is a Jetta 5 air conditioner compatible with?
Hello there. It really depends on what year, make and model of VW you have; and which part of the AC system you are using. There are multiple components that comprise the AC system of today's modern cars, trucks and...
1998 Mazda protege: Had the EGR valve replaced, cleared the computer codes, still get the check engine light then a EGR problem co
Code P0400 (https://www.yourmechanic.com/article/p0400-obd-ii-trouble-code-exhaust-gas-recirculation-flow-malfunction-by-jay-safford) does not necessarily mean that there is something wrong with the EGR valve itself. The only way to condemn the EGR valve is to directly test it. In particular Code P0400 includes a circumstance where the EGR...