Skip the auto shop - Our mechanics make house calls

Q: Detached hose

asked by on

A hose is detached.

A: If a hose is detached, I would try and figu...

If a hose is detached, I would try and figure out where it may have come loose from. If you are not comfortable, or unable to find where the hose is disconnected from, I would recommend having a professional technician, such as one from YourMechanic, inspect the hose and look over the vehicle to determine what needs to be done.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: camshaft chain

A screw extractor set may work. It depends partially on how clean the break is, how accurate you are with drilling out the bolt, and how tight the remainder of the bolt is. I suggest using a factory approved bolt,...

Q: While idling, if I hit the gas, my car will shut off.

Hi! If it has never run right since the engine replacement I suggest rechecking every connection on every sensor. Take them off one at a time, inspect closely, and put them back on. I would also want to see fuel...

Q: Car slightly shutters when coming to an abrupt stop. Failing master cylinder?

If you are getting a pulsation in the brakes and do not have an ABS or any light on in the dash then this is most likely caused by the front rotors of the brakes are warped. You should have...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.