Serpentine belt replaced

Code P0353 is a misfire code for cylinder 3 and replacement of the plug and coil means that the problem is unlikely an ignition system component. Cylinder misfires can caused by several things, ignition system components (spark plugs and coils),...

Transmissions can be totally destroyed inside and not shift or it could be something simple such as a speed sensor if reading erratic. The only way to tell is to have the system thoroughly checked by a certified transmission technician,...

The center console compartment provides extra storage inside your vehicle. The compartment is located in between the armrests of the driver’s seat and the front passenger’s seat. To open the compartment, lift up on the lever, and pull the lid...

Hello. The only future problem you will have is no A/C will not allow the defroster for the windshield to remove moisture from the air to clear the windshield of fog. As long as the belt is able to rotate...

This may be related to a couple of different things. The fact that it must be jumped to get it started is usually a sign of a dead battery or an alternator that may not be working. In rare cases...

Hello There, Shaking at high speeds is often times related to tires that may be out of balance, low on air, potentially a badly aligned front end or failing suspension components or ball joints (https://www.yourmechanic.com/services/ball-joint-front-replacement). When any of these things...

Hi There, The lack of heat being generated by your system may indicate a clogged heater core. The [heater core]((https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then...

Hi there. Based on your input, it's likely that the source of your issue are the relay's (as indeed they do "click" when activated) but it's also possible that your issue is caused by a different ignition system component. Assuming...

Hi there. If the coolant leaks out too much, the computer will see this from the coolant temperature and coolant level sensors and shut off the engine to prevent any damage to the engine. Check for the coolant leaks and...