Q: Q: Car stalling and jumping.

asked by on

Te D4 light is blinking and my car stalls and jumps when driving.

This car has a transmission that has solenoids that control the shifting and sometimes the solenoids or speed sensor causes erratic shifting. The vehicle would have to be tested to see what codes are in the computer and diagnose the failed part from there. I would recommend having a mechanic like, the certified ones at YourMechanic, come and check it out for you to see what is causing the problem.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Car stalling and jumping.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Strange electrical issues that seem unrelated

Hello. It does sound like you have a lot of electrical issues that may or may not be related. In order to find where the problems are, the circuits will need to be tested with a voltage meter. It...

Q: Bubbling behind dashboard when starting car

Hi There, It sounds like you may have air bubbles in your cooling system. Typically, this is easily fixed by having the cooling system flushed. The heater core is also located behind the dashboard in your vehicle which is likely...

Q: Car shuts off after sometime I start the engine!

A poor engine idle could be due to a faulty idle air controller or IAC for short. The IAC controls the engine idle speed by allowing more or less air into the intake manifold. More air equals high RPM, less...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...