Q: Car speakers going in and out

asked by on

My speakers in the back, and on the left side, are going in and out.

The radio is likely the cause, but the speakers may also be the cause. If the speaker sounds good one minute, then bad the next, then it is the radio. I recommend that you have a mechanic, such as one from YourMechanic, come by and inspect you car’s sound system.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Car speakers going in and out

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My car will not move at all in any gear. It starts up fine but does not move in gear.

Hi there. Check the shifting cable from the shifter housing to the transmission and see if its out of adjustment. A shifter cable that is out of adjustment will cause the shifter on the transmission to be out of sync...

Q: Light problem.

Hi there: Most of the time, this issue is caused by a faulty electrical relay connected near the rear of the brake light, or a fuse that supplies power to the rear brake light (usually one fuse for each side...

Q: Rattling sound coming from beneath steering wheel

The most common cause of this would be a clicking relay or something else that is loose. This is a more uncommon issue that will require diagnosis to confirm. A qualified technician, such as one from YourMechanic, will be able...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...