Q: can i put a murcury marauder transmission in a crown vic
can i put a mercury marauder transmission in a crown vic
My car has an automatic transmission.
The two transmissions are the same except with different gear ratios inside. Make sure the two transmissions have the same electrical connections before swapping them. The connectors will be different if the two transmissions are different years.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
What Are the Common Issues After a Timing Belt Snaps?
The most common issue that occurs after a timing belt snaps is that your engine won't start. Another common issue, depending on whether you have a freewheeling engine design or non-freewheeling engine design, is a piston making contact with a...
How do airbags work?
Airbags play a big role in keeping vehicle occupants safe in the event of a crash. They way in which they work is simple, yet the process has been fine-tuned over the years to offer as much protection as possible....
My EVAP canister has a small leak
Hello! I suggest that a technician with a smoke machine test your EVAP system. The smoke will come out of any area of the EVAP system that is leaking. Most Auto shops will have a smoke machine. I would recommend...
Brake lights don't work when I brake or reverse.
Hello. It sounds like there may be an issue with the brake light wiring system. It is also possible that the brake light switch (https://www.yourmechanic.com/services/brake-light-switch-replacement) or brake light switch wiring is faulty. It would be a good idea to have...
Car vibrates in gear, but not in park
Many different parts can cause a vibration when the vehicle is in drive. The most likely would be an engine mount or transmission mount. It would probably be best to have this looked at in person. A certified technician, such...
Car has electrical problems and starting issues
My guess is that the problem is with the body control module (BCM). The BCM functions as the power mode master (PMM). In this role, it receives an input from the ignition switch when the key is turned to the...
Car turns off out of nowhere
Hello, I would suggest testing your alternator. If jump starting will start your vehicle, use a multi meter to test your alternator while the vehicle is running. Good alternators test in the range of 13.8 to 14.2 volts. If it...
Chain scraping noise - 2008 Honda Civic
It could be the CV axle, but it could also be a rock stuck in between dust shield of the brakes, the brakes could be metal-to-metal, or a wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement) could be bad. The CV axle is actually the...
What is Estimated Cost of repairing P2432 code in 2012 VW Jetta ?
Hi - the P2432 problem code you have is an indication that the secondary air pump (https://www.yourmechanic.com/article/how-long-does-an-air-pump-last) pressure is low. This is an emissions device, which injects fresh air into the exhaust to allow burning of any remaining fuel in...
Related articles
How Often Do Spark Plug Wires Need to Be Changed?
Spark plugs provide the electricity necessary for combustion to happen by igniting atomized fuel in an engine's cylinders. However, they need a...
The Top 5 Selling Cars in Georgia in 2012
Georgia Georgia offers drivers a mild climate with very little snow, but rain is a major factor. Previous best-selling cars in the area, such as the Escape, Fusion and Camry, have shown that residents prefer a mix of both SUV...
How to Replace a Transmission Oil Pressure Switch
A transmission oil pressure switch relays measurements from the pump. If the filter is clogged, this switch puts the transmission into limp mode.
Browse other content
Services
Cities
Estimates