Can’t get my belt tightened on my car pulleys.3800 1993 B...
Responses
RobertW710
363 days ago
I ise a prybar to strecth around pullies. Are you moving tensioner pully up with ratchet?
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Erratic shifting
Hello. It would appear that these 2 problems may perhaps need to be addressed separately. If these problems began after you replaced a sensor, then it may be possible that the problems are related to the repair. I would recommend...
My car won't accelerate in drive. But will accelerate in park or reverse. The last couple of days. While driving the battery ligh
You may have a defective transmission valve body or the transaxle is bad internally. The manufacturer recommends replacing the valve body assembly first and then the complete transaxle if the problem is still happening. I suggest having you transmission tested...
Hooked up battery backwards everything works but engine won't crank
i am working on this
Cruise control quit working
Thanks for writing in about your 1998 Chevrolet C1500 Suburban. I would want to diagnose the brake pedal switch (https://www.yourmechanic.com/services/brake-light-switch-replacement) first so I wouldn't replace one that is working fine. A technician using scan tool will easily be able to...
ASE certification
Hello and thank you for contacting YourMechanic. Yes, experience will greatly help out a lot when it comes to taking Automotive Service Excellent tests (ASE) (https://www.yourmechanic.com/article/how-to-become-ase-certified). When it comes to taking ASE tests, you need to think about the procedures...
Fuel or computer issue
Hey there. The problem could be a fuel-related problem but In my experience these vehicles have problems with the distributor ignition can cause loss of power. The vehicle's computer should be scanned for trouble codes and any irregular data and...
Replaced a motor in a 2001 Nissan Maxima and won't crank.
Hello: Anytime you swap out a motor, it's incredibly important to double check that all components correctly align and are compatible. The truth is that without being there to physically inspect your Maxima, it's impossible to diagnose why your engine...
Hey my check engine lamp work but my Rom and speed lamps do not what could cause this
The instrument panel has quite a few separate bulbs. You may have a circumstance where some of the bulbs are faulty and need to be replaced. If you are referring to intermittent operation though and/or gauge malfunctions, the cause could...
Dodge Journey 2010 won't start had diagnostic check they said everything was good
Intermittent problems with no codes are the hardest to identify the cause. You may have a problem with the fuel pump intermittently sticking off or a relay that is not coming on intermittently in the (TIPM) Totally Integrated Power Module...
Browse other content
Estimates
Cities
Services
Can’t get my belt tightened on my car pulleys.3800 1993 Buick park ave ultra Mechanic's Assistant: Which belt is acting up? And when was it last changed? Serpentine belt Mechanic's Assistant: Are you fixing your P...
Can’t get my belt tightened on my car pulleys.3800 1993 Buick park ave ultra Mechanic's Assistant: Which belt is acting up? And when was it last changed? Serpentine belt Mechanic's Assistant: Are you fixing your Park Ave yourself? What have you tried so far? Yes can’t get it around all the pulleys Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? What do I do