Q: Bmw misfire

asked by on

During cold start the vehicle misfires an smokes until it’s warm Iv changed coil plugs and still does it. Once warm it’s great. Throwing code for cylinder 6 misfire

My car has 191000 miles.
My car has an automatic transmission.

You will need to have the cylinder number 6 compression tested to see if there is low compression in that cylinder? If it is low then have the cylinder pressure tested to see if the valves or piston rings are leaking. You may also want to have the combustion intake cleaned to remove any carbon buildup and see if this helps.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Door lock won't open from inside

Hello. If the door will open from the outside and not the inside ,then most of the time the handle has broke or the cable from the handle to the latch mechanism is damaged. The door panel will need to...

Q: Linkage not working correctly

The problem most likely lies in either the shifter assembly or the linkage rod has become disconnected. The shifter and linkage rod need to be inspected for failure. You may want to enlist the help of a mechanic, such as...

Q: I have a 2007 bmw 335i smoke

Running regular fuel in an engine that takes premium fuel only may cause engine to get a pinging noise and may not run correctly until you get the correct fuel in it. Have a mechanic like one from YourMechanic check...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...