Skip the auto shop - Our mechanics make house calls

Q: AC stopped blowing

asked by on

My AC stopped blowing while driving. It sounded like there might have been a problem with a fan belt.

I would ask for help from one of the mechanics at YourMechanic. They can come to you and check your air conditioning system and fan belt to see what is causing your problem. Once the problem has been diagnosed, they can fix it.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Overheated

With the spark plugs out you should have the cylinders pressure tested to see if you have compression leaking between cylinder 2 and 3. The compression test indicates the head is warped and leaking compression between cylinders 2 and 3....

Q: Cooling Fans

The engine fans should turn on based on engine temperature. If the sensors you just replaced are not connected properly, it would cause them to fail. When repairs have been made recently, always verify they are holding. Have you checked...

Q: I now know my catalytic converter is bad can I still drive it to work til I have it fixed in a day, I drive one way 65 miles

Although you catalytic converter may still allow the car to run, there is often times no telling when it will cause the car to not run. As you have experienced, this will cause the car to get very poor fuel...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.