Q: 95 grand Marquis GS

asked by on

I have a 95 grand marquis gs when i turn on the heater or AC it makes a loud noise....
My car has an automatic transmission.

You may have a blower motor with debris that got into it from under dash. It may be paper or other debris that are in the fan blades and will make a rattle slapping noise and can only be cleaned out by removing the blower motor and cleaning it out.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. 95 grand Marquis GS

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Heater is not working

The lack of heat being generated by your system may indicate a clogged heater core. The [heater core]((https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this...

Q: Car wont start and the battery is great.

Hi there. Check the throttle position sensor on the throttle body and see if the sensor is working properly. The sensor is common to fail and cause the engine to not restart. I recommend replacing the throttle position sensor and...

Q: Front of car sitting on front passenger's side wheel

If the tire is gone, or shredded, you had a blow out and will need to replace the tire. If the suspension is sagging to the point that the fender is rubbing the tire, you have a suspension failure. This...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...