Q: 2007 Dodge Grand Caravan - Codes P0700, P0734, P0732, P0871, P0846, and P0841

asked by on October 30, 2016

I have no rev gear now but veh will go forward after an increase of the rpms, there aren't any grinding noises. I do recall a burning smell for weeks but it went away I'm thinking that could be related to my issues

My car has 92000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Car revving without gas

Do these "excursions" in engine speed occur only when the car is in gear (driving on the road)? If you have uncommanded acceleration in park, or failure of engine speed to return smoothly to idle after speeding up the engine...

How do you work the automatic transmission?

While an automatic transmission is simpler to operate than a manual transmission is, there are several things that you’ll need to know to ensure that you’re able to drive safely. Here’s a quick rundown of what each gear does: ...

My van was missing and rough idling then I turned it off one day and the next day it starts then dies and some times it won't start

Hello, thanks for writing in about your 2001 Dodge Caravan. For certain, given your mileage and codes for these 2 components, replacing these 2 sensors is the minimum. Cleaning the idle air control valve, throttle body, and PCV valve should...

Related articles

P0113 OBD-II Trouble Code: IAT Sensor Circuit High Input Problem
P0113 code definition Intake Air Temperature (IAT) sensor circuit high input problem What the P0113 code means P0113 is the OBD-II...
P2020 OBD-II Trouble Code: Intake Manifold Runner Pos Sensor/Switch Circuit Range/Performance Bank 2
P2020 P2020 Code Definition A P2020 code is a generic powertrain code related to the fuel and air metering and auxiliary emissions control systems. The Intake Manifold Runner Control (IMRC) controls are utilized to change or control airflow in the...
P0680 OBD-II Trouble Code: Cylinder 10 Glow Plug Circuit
P0680 means the system reference voltage allowed by the vehicle’s ECM has exceeded 10% of the allowed variance due to a defective plug, or module.