Q: 2004 crown Vic p71 sound of revving while in park at times in a high pitch

This is almost certainly an issue with the clock spring on your vehicles steering column. This is the part that allows steering wheel electronics to be connected without wires so that the steering wheel can be turned without risking a...

Hi there. If the noise is occurring when operating the clutch, then it may be in the clutch itself. If there is slipping, then the clutch itself is bad. If the noise only occurs when pressing in the clutch, then...

Hello. There are a few things that may explain why you are experiencing a hesitation problem with your 2002 Lexus SC430. However, it is very difficult for any mechanic to diagnose an intermittent condition. Sometimes they need to worsen before...

Hi there. Overheating problems can be caused by multiple issues, ranging from an air bubble trapped in the coolant lines, to a faulty or damaged water pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-water-pump). One items that is concerning for your 2006 Nissan Altima, however, is...

An engine is stalling inspection (https://www.yourmechanic.com/services/car-is-stalling-inspection) will reveal the cause. When the vehicle is cold, the mixture has to be enriched in order for the engine to run initially. That enrichment signal is sent (to the fuel injectors) if the...

Hi There, It sounds like you have a faulty instrument cluster voltage regulator (https://www.yourmechanic.com/services/instrument-voltage-regulator-replacement) that may be causing the weak power source to the dash lights. The instrument voltage regulator regulates the voltage supplied to the various gauges in your...

Hi There, Depending on the type of work needed to repair a cylinder head, the price to repair can vary quite drastically. If machine work is needed this can impact the repair costs severely. As you know, depending on what...

Hi there. The Vehicle Stability Assist light typically will trigger when the system has been disabled and it not the source of misfiring or acceleration issues in most cases. Since your check engine light is illuminated as well, it is...

First, you will want to locate the battery on your vehicle. Then, disconnect the negative cable on the battery first. Next, disconnect the positive cable. Finally, remove any hold down hardware and remove the battery. In order to install the...