Popular questions

Hi there. From the description you have provided, your vehicle's brake problem is not something to live with. The brake system needs to be inspected and repaired, before you continue driving your vehicle. The brake pedal going 90% of its...

The "technique to get it out" depends on exactly where it is. There is sometimes a possibility of a foreign item safely staying in place but admittedly in a transmission that is a speculative proposition. At any rate, there are...

Hi Short, Thank you for contacting YourMechanic! To set up the quote for the AC flush for your vehicle, we need some extra information in order to get you the most up-to-date prices on parts and labor. To verify...

Hi there. It seems that your transmission has a large leak. The first thing to do is to move the vehicle to a safe area where an inspection can be performed. Locating what has ruptured, cracked, split, ect... may be...

Hello. It sounds like the engine does not crank at all when this occurs. This is typically caused by a failing ignition switch or transmission position sensor. The most common issue I have come across on this vehicle is the...

While the information provided is a bit limited, I can attempt to give you some direction for the concerns mentioned. It was mentioned that your Honda Accord is not getting fuel. If this is the case, you may have...

It sounds like you are referring to what is known as the window washer fluid light. This light indicates when the window washer fluid tank is getting low on fluid. During stop and go traffic or when braking, this light...

This sounds like you have electrical connection issues with the dash or body control module. These vehicles are known to have electrical connection corrosion buildup that caused these erratic electrical problems including no starts and running issues. This problem will...

This may be a result of a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and...

Yes, you can change the language by following the same steps in the display menu when choosing languages. You may be able to find a step-by-step guide in your owners manual. The menu items usually come up in the same...

You my have a slipping clutch and should have it checked by a mechanic like one from YourMechanic to see if the clutch needs replaced.

This may be related to many different possibilities, some of which may be related to a lack of spark and some of which may be related to a fuel delivery problem or a combination of both. For example, if the...

The maintenence costs for the Porsche as opposed to the Audi would be entirely dependent on which type of oil and filter you use as well as the amount of oil that the Porsche engine requires. If the two engines...

The temperature gauge issues may be the result of a faulty coolant temperature sensor or a low coolant level. If there is no coolant in the system, the sensor cannot read temperature accurately. It would be best to consult the...

Hi Cristina. The rear lights are typically powered by an electrical relay, that supplies power to individual lights as input is received from the accessory module. For example, when you turn on the headlights, a signal from the module sends...

The best course of action would be to have a diagnosis first since the throttle control may be limited if you are having a system or sensor failure in the drivetrain like a transfer case or transmission issue. You may...

The clutch release bearing is the most likely cause of this noise. If so, then the transmission would need to be removed to service it. I recommend having a mechanic, such as one from YourMechanic, come to you and run...

Hello, From what you describe it appears that whatever problem your vehicle may be experiencing has caused it to go into limp mode. Limp mode is a precautionary mode where the power and speed of the vehicle are severely limited....

Unfortunately, without re-threading the bolt hole, the control arm may need to be replaced. In some cases, re-threading is a viable fix, however depending on the severity, it does not always work. I would suggest having a professional from YourMechanic...

You want a wheel that has the same offset, backspacing, and width as your existing wheels in order to avoid handling problems. If you had OEM wheels, I could tell you the offset but inasmuch as you have aftermarket wheels,...

The problem sounds like you are flooding out on fuel or have a stuck open valve for the variable intake. Since the vehicle will not restart you will need to have mechanic like one from YourMechanic come to you and...