Q: Q: Window not working

asked by on

The driver's side window is not going up or down.

Te problem most likely exists in the power window motor/regulator assembly if the fuse is good. The fuse should be checked first, and if the fuse is good, the door panel will need to be removed to check the condition of the regulator and window motor. You may want to enlist the help of a mechanic, such as one from YourMechanic, to assist in the repair and diagnosis of why your window is not going up or down.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Window not working

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Slave cylinder leaking

The hydraulic system used on your Honda is the same as your brake system. If there are leaks in the system and air in the lines, the pressure plate cannot be engaged or disengaged which is required to operate the...

Q: Vehicle runs roughly, shudders and rattles, vacuum leak

Thanks for writing in about your 2000 Chrysler Cirrus. When the coils were removed to replace the spark plugs, they should have been inspected for oil getting on them from a leaking valve cover. The leaking valve cover may leak...

Q: Q: Driver's side window not working.

The power window motor, switch or regulator may be at fault here. The most common issue is the motor failure. The door panel will have to be removed and the motor and switch tested by a qualified mechanic. Once the...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.