Q: What does the tire pressure monitoring system (TPMS) Warning Light mean?

asked by on

What does the tire pressure monitoring system (TPMS) Warning Light mean?

The tire pressure monitoring system (TPMS) Warning Light is located on your instrument panel. When this light blinks for roughly one minute, then your TPMS is malfunctioning, and your car should by inspected as soon as possible.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. What does the tire pressure monitoring system (TPMS) Warning Light mean?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 4 wheel drive will not engage.

Hello. There appears to be three different locations for the control module depending on the chassis. The 4wd control module will either be found behind a kick panel on the passenger side, inside the dash, accessible by opening the glove...

Q: Snapping sound in rear tires going forward and reverse

Hello. Most of the time this is a problem with the flexible joint on the drive shaft. These fail frequently and cause this to occur. The noise happens because there is too much flex and it need to be replaced....

Q: Q: How do I adjust the audio settings?

The audio settings can be easily adjusted, so that you can create a sound system personalized just for you. To adjust the audio settings, follow these steps: 1. Press the Setup button. 2. Rotate the Volume knob to Audio, then...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.