Q: What does the Key-in-Ignition chime?

asked by on

What does the Key-in-Ignition chime?

There is a chime that will alert you when the key is left in the ignition. This chime is helpful to remind you to not lock your keys in the vehicle. To understand the Key-in-Ignition chime.

  1. The Key-in-Ignition chime will sound when the key is in the accessory position and the driver door is open.

  2. Take the key out of the ignition to turn the chime off.

  3. If the chime continues to sound, get the system serviced.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. What does the Key-in-Ignition chime?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Leaking clear but oily fluid when AC is running. It is located through the front end under the hood (by the aluminum cover insulation in front)

Hello. From what you describe, it would appear that your vehicle may possibly have a refrigerant leak in the AC system. I would carefully inspect the area where the fluid is coming from to see if you can figure out...

Q: Q: What does the high-beam on light mean?

The high-beam on light is located on your instnrument panel. When the light is illuminated, the high-beams are currently on. The light will disappear when the high-beams are turned off.

Q: had to replace rear brake caliper, is parking brake cable just worn out? Cant get it back on caliper!

You should install the brake cable before installing the brake caliper. You may have to turn in the caliper again to get it back over the rotor when installing it. If you want to have this done for you, a...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.