☰
GET A QUOTE

Q: What damage could uninstalling my ABS system do to my 2005 GMC Yukon XL 1500 RWD 5.3L flex fuel

asked by on February 07, 2018

My mechanic tells me there is no problem with leaving the unit broken as I drive as long as I drive safely. And he does say it is broken, he can replace it for $2000. Could I completely take out my ABS system W/O problems? Should I have it professionally uninstalled or could I do it in my garage? If none of that is possible because I am tight on money at the moment could I replace part by part? If so, where should I start replacing?

My car has 189334 miles.
My car has an automatic transmission.

Save Big on Auto Repairs Get a Quote

Modifications to vehicle brakes is not something we can help you with due to safety reasons. I can tell you that if the ABS is not active or does not work then the brakes will revert to normal brakes as if you do not have ABS on the vehicle and no modifications are needed. The brakes will stop but without any ABS function.

GMC
2005
V8-5.3L
ABS (Anti-lock Braking System)
Yukon XL 1500
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I use the trunk opener cancellation system?
You can give your trunk added security by activating the trunk opener cancellation system. When this feature is turned on, the trunk can only be opened with a standard or mechanical key, and not with the entry function or wireless...
Read more
Car won't start after changing the fuel pump and filter
When a vehicle will not start, the mechanic will perform a series of test that are basically a process of elimination. We know that, for an engine to start it must have good compression, spark from the spark plug, correct...
Read more
Wheel making rubbing noise
It is very possible that the wheel bearing is causing this issue. I would start by having a suspension inspection (https://www.yourmechanic.com/services/brakes-steering-and-suspension-system-inspection) performed by a qualified technician, such as one from YourMechanic. After a test drive, the technician will likely use...
Read more
My car cranks but doesn't turn over
Hi there. First, we need to determine what is going on. Does it crank and not start? or does the engine not crank/turn over? Cranking and turning over mean the same to technicians. You described it as cranking and not...
Read more
Car will not shift gears, stuck in neutral.
Hello - your symptoms suggest a failure or disconnect of the shifter linkage to the transmission (whether cable (https://www.yourmechanic.com/article/how-long-does-a-shift-selector-cable-last) or mechanical linkage). Most likely, this is external to the transmission, and can be repaired without having to get inside the...
Read more
I went to fill gas but the hose had a hole in it and started to spray. I put the hose down but it soaked sides of my car.
Hi there: I'm not quite sure what you're asking; however, if the issue is that you've sprayed gasoline on your vehicle, the best way to remove it from your car is to simply clean with soap and water. If your...
Read more
Not Changing From E Mode To Hybrid
The illumination of the check engine light tells me that vehicles computer has picked up a fault which may shed some light on the problem causing your stalling concerns. Typically it is not good practice to run a vehicle too...
Read more
2014 Ford Mustang V6, Driveside power seat is not going up and down
Hello. If the seat is not moving then most of the time this is caused by a failure in the seat motor. It can also be a wiring issue so it needs to be inspected first. If you need to...
Read more

Related articles

Can Sensors Be Cleaned or Do They Need to Be Replaced?
In In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many...
Read more
A Buyer’s Guide to the 2012 GMC Yukon
When When you want a big SUV that can hold its own, come what may, you’ll be happiest with a GMC Yukon. Although the inside of one of these vehicles can sometimes resemble an upscale hotel room, the 2012 GMC...
Read more
How to Replace an ABS Control Module
An ABS module can be a difficult part to replace depending on the manufacturer's design. You may need to reprogram and bleed the system if necessary.
Read more

Browse other content

Maintenance
Cities
Estimates
Cars