Q: What are the Torque specs for a inner tie rod

asked by on February 02, 2017

I'm been trying to find the specification of torque to apply when tighten the inner tie rod. I have search and searched and uncovered nothing about it. Any information on this is much appreciated because My inner tie rods are bad.

My car Lexus GS400 1998 My car has 125000 miles.
My car has an automatic transmission.

The torque specification for the lock nut is 41 foot pounds. The specification for the ball joint end is 64 foot pounds.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Transmission slipping, hard to stay in gear
Automatic transmissions have been called “slush boxes” for years by old drag racers. The main reason for this name is they are a fluid driven device. Because of this, fluid level and condition are crucial to proper operation. Unfortunately, the...
Radiator hose pops off
The cooling system would need to be opened to see if, when the engine is cranked, the combustion of the engine is pressurizing the cooling system, and blowing off the hose. The head gasket may be blown. I recommend having...
Steering wheel vibration when braking
Most likely, your tires and/or wheels are out of balance. Balance problems are typically most evident at speeds above 45 miles per hour. A professional can inspect your vehicle to determine if this is indeed the issue. If it is,...
My low beam headlights will not work how can I fix this?
Hi there, thanks for writing in. If the headlamps are not coming on at all, then you may have an issue with the control circuit. The controls for these lights come from the body control module. It is common for...
Smoke from exhaust still after new PCV and turbo
Hi there, thanks for writing in. I am sure that you have driven your car far enough (since repairs) to rule out residual oil in the exhaust system. The P0015 "cam retard" code (https://www.yourmechanic.com/article/p0015-obd-ii-trouble-code-camshaft-position-b-timing-over-retarded-bank-1-by-jay-safford) may be a cam sensor, oil...
"Service Stabilitrak" has come up on my dash and I do not know what it means?
Hey there. These messages are there to tell you that the main computer has detected an issue with the systems. The warning lights are very general. They can mean the system is malfunctioning, the system has been turned off, or...
Would a 2000 VW Passat 2.0 ECM fit in a 2002 VW Passat v6 3.0?
Hi there. The Engine Control Module (ECM) on a 2.0 engine will fit on the 3.0 engine, however, the ECM may have to be flashed (reprogrammed) to the vehicle you have. If the engine block was swapped out, then the...
Car runs rough sometime an engine diagnosis says I have a misfire in three of my six cylinders sometimes car runs smooth other tim
Hello, thank you for writing in. When it comes to a misfire on several cylinders, the vehicle is likely struggling with compression. If the issue was fuel or spark related, the engine would have a misfire code on all cylinders....
I need to know, step by step how to manually access and open the liftgate of my 2015 Ford Edge Titatinum.
If the mortgage absolutely will not open usually the only way is to physically break off the rear panel entirely to access the latch. This is usually due to the fact that some of the mounting screws are not accessible...

Related articles

How to Buy a Good Quality Steering Wheel Lock
If If security is something that you worry about where your car is concerned, then you've probably considered a steering wheel lock. These can be used to prevent someone from stealing your car, because even if they manage to break...
Symptoms of a Bad or Failing Ball Joint (Front)
Common signs include clunking noises and excessive vibration from the front, and you may start steering to the right or left unintentionally.
Symptoms of a Bad or Failing Flex Coupling Steering Damper
Common signs include excessive vibrations in the car and steering wheel play or lock up.