Q: Q: Turn signals

asked by on

I recently bought a truck and when I turn signal on it blinks the tai light and not where it suppose to. The bulbs are good what's going on.

Try to turn on and off the 4 way flasher switch several times and then leave off then try turn signals again. If they still act up then you most likely have a bad turn signal switch internally shorted.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Turn signals

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Lights flickering when the throttle is pressed and the turn signal is on.

The issue seems to be with the multi-function switch for the turn signals. The switch is shorting out inside it on the high beam selector which is effecting all of the lights. I recommend replacing the multi-function switch. If you...

Q: Q: Reverse lights will not work

Hi there. The backup lights are controlled by the park neutral switch on the side of the transmission. Check the switch to make sure the transmission is not leaking fluid out into the switch. The switch may have a bad...

Q: Brake bleeding problems

You are going to need to have the ABS module put into bleed function using a scanner that can enable this function or have a mechanic that has a scanner (with this function) and a pressure bleeder to pressure bleed...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.