I just ejected a cd, and I am trying to put a new cd in m...
Responses
Bart
221 days ago
Hi I'm Bart. I'll be helping you today.
If you remove the fuse for the CD player and reinstall it it should auto eject regardless of whether or not CD is installed and reset the light. I'll provide the fuse location momentarily.
There are multiple options for your radio.
Do you have navigation?
Customer
221 days ago
No
Bart
221 days ago
Here is the fuse to remove and install.
Bart
221 days ago
This fuse box is under the hood.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Car squealing and growling.
Hello, From the way you describe you noise, the first thing I would take a look at is the power steering fluid level (https://www.yourmechanic.com/services/power-steering-fluid-is-leaking-inspection). If the level is low, there is probably a power steering leak that needs to be...
I have a 98 Blazer (4x4); it will not start unless I smack/hit the gas tank. Already replaced fuel filter.
Hey there, thanks for writing in about your 1998 Chevrolet Blazer. It sounds like you may have a problem with the fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement). Sometimes when they wear out, they develop a dead spot. By hitting the tank, it jolts...
Unplugged wires ECM DTC
Hello. It is a common issue for the ABS control module to go bad on these trucks. Either the modules are ridiculously expensive or they just aren't available anymore. That is why the connector was unplugged. That is the "cheap"...
Issues while shifting into park - 2011 Land Rover LR4
Hello. It sounds like the parking pawl inside the transmission might be failing. When an automatic transmission is put into park, it is mechanically shifted into neutral and the pawl will engage a gear connected to the output shaft of...
Car starts sometimes for a few seconds. Car ran completely out of gas. I changed the fuel filter, and change battery in the remote.
Hi there. The fuel pressure needs to be checked on the fuel rail. There should be at least 30 psi on the fuel rail. If the fuel pressure is good, then there could be air in the fuel rail causing...
My door wont open inside and out
Hello, thank you for writing in. The airbag and the door latch issue are very likely two separate issues. Concerning the handle, you need to focus on the latch mechanism itself. Both inside and outside handles have their own connections...
My 06 ford freestyle turns over buy wont start could you possibly tell me what's the problem
This may be related to many different possibilities, some of which may be related to a lack of spark or possibly timing issues and some of which may be related to a fuel delivery problem or a combination of both....
I have a 2007 Cadillac STS , the passenger door will not unlock with the fob or unlock from inside the vehicle controls , you have
Hi Ken. Thanks for contacting us tonight. What you are describing is commonly caused by an open or damaged electrical relay that operates the power lock function on your door. When the relay is stuck in an open position, it...
What does it mean when Brake light stays on
Your car probably has several brake warning lights on the dashboard. I'll presume that you are talking about the one that comes on when the parking brake is set. If that light stays on it may mean there is a...
Browse other content
Estimates
Maintenance
Cities
I just ejected a cd, and I am trying to put a new cd in my cd player. My cd player is still saying that it has a disc in it. How do I fix it so that I can put a new cd in? Mechanic's Assistant: What is the make/model/year ...
I just ejected a cd, and I am trying to put a new cd in my cd player. My cd player is still saying that it has a disc in it. How do I fix it so that I can put a new cd in? Mechanic's Assistant: What is the make/model/year of your car? Toyota matrix 2010 Mechanic's Assistant: Are you fixing your Matrix yourself? What have you tried so far? I have tried some reset options like holding down the power and eject buttons, but it didn’t work Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No, car works great otherwise