Q: The service engine light comes on in the dash but doesn't stay on when I start the engine is that normal

Hello. There are many components involved in the air conditioning system, and many possible points of failure. If no air is coming from the vent, you can consider the interior fan and its circuits. Cool or warm air when the...

Hello. Most vibrations are related to some kind of misfire. A misfire can be related to air, fuel, or spark. This vibration is noticeable when the vehicle is not moving because the RPMs are lower. As the vehicle speeds up,...

Hello. Engine stalling can be caused by many things. A few common causes are issues with the fuel, ignition, or engine management systems. If any of the components to one or more of these systems fails or has an issue...

It's possible that your headlight switch is the source of the problems you're having; (especially if it's all headlights that are not working correctly). It's also possible that you may have an exposed wire somewhere creating a short in the...

Hi there. As long as the motor mounts are for a big block, and the flywheel and transmission were originally designed for a big block GM, you should't have any problems with that engine swap.

you will need to have the computer scanned to see if the cooling fan relay can be turned on and off with the computer using the factory scanner or by replacing the fan relays in the fuse box. It is...

Engine "seizures" are only caused by lack of engine oil, cooling system overheating, and internal mechanical breakage (e.g., timing chain/belt on interference engines). If the transmission fails, in any respect or due to any cause, there are no adverse consequences...

There is typically an adjustment to the push rod on the master cylinder that must be performed at installation of a new master cylinder to insure that the brake booster is not in constant contact with the push rod, thus...