Q: Serpentine belt came off of 2006 BMW 325i

asked by on

The serpentine belt in my car came off.

The serpentine belt tensioner and idler pulleys will need to be replaced when replacing the belt. The tensioner will not hold tension on the belt and the pulleys may be worn and allowed the belt to ride off. I recommend having a qualified mechanic, like one from YourMechanic, come and check the problem for you and give you a diagnosis.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Serpentine belt came off of 2006 BMW 325i

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car producing loud hum when accelerating, engine stalls before starting up

I believe the humming sound you are hearing could be related to a faulty wheel bearing. When wheel bearings dry out they will begin to make humming or growling noises when the vehicle is accelerating. I would recommend having your...

Q: Q: Warning lights after ABS brake flex lines replaced

The ABS and brake light warning switch are on different circuits and do not work with each other. The most likely cause of the Check Brake Light message would be a wiring issue, failed bulb, improper bulb, or a brake...

Q: After shop replaced my starter on 330ci bmw, my car is in limp mode

Hi. More than likely there is a fuse blown causing the car to be in limp mode. This could have happened when they reconnected the battery or when things were removed to get to the starter. The shop will always...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...