Q: Removed Drive Shaft, is it still drivable with 4WD ?

asked by on

I removed my rear drive shaft and was wondering if it is still drivable using 4WD(4H)?

My car has 213000 miles.

Hi Erick. Thanks for contacting us tonight. The Pathfinder is a rear-wheel drive first vehicle, meaning that in order to propel the vehicle, the rear drive shaft must first be engaged. So, unfortunately, until the rear drive shaft is repaired and replaced, the vehicle should not be driven.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Removed Drive Shaft, is it still drivable with 4WD ?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Getting codes P0161 and P0325

Hello. Both codes indicate a circuit failure, and I suspect that the connectors were not properly reconnected after changing the valve cover gasket. These codes are not likely actual part failures. It is a very tight squeeze to get in...

Q: Sounds like the timing belt is about to fail - 2004 Nissan 350Z

Hi and thanks for contacting YourMechanic. The 2004 350Z will have a timing chain. The noise you are hearing is the chain guides that are rubbing the chain. The guide materials are worn off and the guides need replacing. While...

Q: My odometer and the rpm does not work on my 2005 Q56 infinity.

This could be related to a couple of possibilities. The [instrument voltage regulator]((https://www.yourmechanic.com/services/instrument-voltage-regulator-replacement) regulates the voltage supplied to the various gauges in your vehicle’s dash. When this is not working properly, this may cause the gauges in your dash to...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...