Q: Problems starting car. Replaced fuel filter.

asked by on

Engine turns over, but won't start. Will run if fuel is poured into the bowl. I did replace the fuel filter.

I would have the fuel system checked out by YourMechanic. They will need to put a pressure gauge on the fuel rail to test for fuel pressure. It sounds like you may have a bad fuel pump, in which case, it will need to be replaced

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Problems starting car. Replaced fuel filter.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Need to know where block heater on 2000 Buick lesabre

Hi Katie. Thanks for contacting us today. An engine block heater is an optional upgrade on a 2000 Buick Lesabre, so it's possible that yours does not have one. However, if it does, it will be located on the rear,...

Q: How to change a fuel filter in a 2005 Nissan Quest?

Hi there. The fuel filter is part of the fuel pump, so if you are wanting to change the fuel filter, the fuel pump must be changed as well. The fuel pump is located in the fuel tank and the...

Q: How do I open the trunk with the remote keyless entry (RKE) transmitter?

The remote keyless entry (RKE) transmitter can be used to open your vehicle’s trunk. Here’s how: 1. Press the unlock button on the RKE transmitter. The unlock button looks like an open padlock, and will unlock all of the vehicle’s...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.