Skip the auto shop - Our mechanics make house calls

Q: Power windows do not work.

asked by on

I checked all the fuses, and cleaned and replaced the main switch.
My car has a manual transmission.

A: Check to see if you are getting power to th...

Check to see if you are getting power to the white wire to the driver’s window switch when the key is on. If not, then check and replace the ignition relay 2 in the engine fuse box. The main circuit breaker that powers the relay is in the left side of the dash.

If you need more help tracing the problem, then have a mechanic come and inspect your faulty window and recommend the best path to repair.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Headlights wouldn't turn off / now they won't turn on

The most likely components to cause this may be the headlight relay, headlight switch, or the ignition switch itself. The relay is an electro-mechanical switch. The headlight switch sends a power signal to it. It then switches on internally to...

Q: The AC on my 2009 Altima is not working. The clutch does not engage and there is no power at the harness on the compressor.

Hi there. I would highly recommend having one of our professional mobile mechanics come to your location and complete an AC is not working inspection, before attempting further diagnosis. There are several possible reasons why you might be having these...

Q: Car feels like it's going to stall.

This is a common symptom of a misfire or potentially a faulty idle air control valve which when faulty, can cause the misfire to happen due to an improper air/fuel mixture being supplied to the engine. The idle air control...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.