Skip the auto shop - Our mechanics make house calls

Q: Overheating when the heat is on.

asked by on

The car was hit in the front end when our son was driving it. He had to keep adding water to it as he drove from where the accident happened. When the garage fixed the damage from the accident, they put in a new radiator. We just replaced a hose also, but it is overheating when the heater is running. If you turn off the heater the temperature comes down. When the heat isn't turned down yet, it will start to blow cold air while the temperature is going up. What do you think?

My car has 180000 miles.
My car has an automatic transmission.

The heater not working in some cases may be related to the overheating problem you are also having. This may be due to a faulty heater blower motor or potentially a bad heater core. As you may know, the heater core is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this warm coolant to heat the inside of the car with the help of the blower motor that blows the warm air through the vents inside the car. When the cooling system is not properly circulating coolant through the motor, this results in the warm coolant not being pumped through the heater core properly in order to warm the inside of the vehicle.

Engine overheating can be caused by a number of things such as low coolant levels, a faulty thermostat, or a failing coolant fan switch. As you may know the coolant fan switch helps to maintain the proper coolant temperature by turning on and off at specific temperature thresholds. When this switch is not working properly, this can cause the fans to come on intermittently, all the time or sometimes not at all. When this happens you will notice a temperature spike and drop occasionally as the fan comes on and off. When your thermostat is not working properly or is stuck closed, this will not allow the coolant to properly circulate through the engine, which may cause the engine temperature to fluctuate erratically or in some cases just remain hot. As mentioned above, this also restricts the warm coolant from flowing through the heater core which uses this to blow warm air into the cab of the vehicle. I would suggest having an expert from Your Mechanic come to your home to diagnose your cooling system.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Overheating when the heat is on.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Transmission slip, car bucking, code P0741

Hey there. This may be related to a fuel supply issue such as a dirty or failing mass air flow sensor. This is a unit in the intake system that reads the air flow into the engine as it is...

Q: Chirp and squeal goes away when braking(new brakes new rotors)

You will need to have the brake pads and rotors checked to see if the sensors are not rubbing on the rotor. Also the backing dust plate may be hitting the rotor. If your ABS is engaging when it should...

Q: Overheating car

Hello, thank you for writing in. To start lets discuss the radiator cap. The system is designed to work under a certain amount of pressure. If the cap is off, the pressure will release through the opening and cause it...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.