Q: No crank no start with new battery starter and ignition

asked by on

My car won't start at unless I push star or jump the starter I have a new battery a new starter and a new ignition switch

My car has 108000 miles.
My car has a manual transmission.

This sounds like an electrical issue. Possible causes of the no crank no start are:

  • the starter + solenoid
  • battery cable
  • brake switch
  • neutral safety switch
  • an open / short circuit

A qualified technician such as one from YourMechanic will be able to diagnose the no start fault and perform any repairs required.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. No crank no start with new battery starter and ignition

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I have a 2000 Buick Century and the gas gauge goes up and down

You're guess of the fuel sending unit is a good one. The sending unit is a variable resistor, that changes its internal resistance according to fuel level. This information is then sent as an input to the powertrain control module...

Q: Not shifting out of first

The problem may be a speed sensor, a transmission internal shift solenoid, or harness issue. Only a scan and diagnosis will show the cause. If you need help with this, a certified mechanic, such as one from YourMechanic can come...

Q: Q: Ticking noise when accelerating

Hello! Many things could result in a ticking sound when driving, from a fuel injector to the turning axle bearing. Any qualified mechanic, such as our YourMechanic experts, will be able to diagnose this issue for you.

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.