Q: Moonroof stuck open

asked by on

The moonroof is stuck open. The motor can't seem to close it. What do I do?

What is most likely happening is that either the motor has failed, or there may be debris in the moonroof track which is blocking the window from closing properly. I recommend having a mechanic check the moonroof for you in order to properly diagnose and repair your moonroof.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Moonroof stuck open

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do you use the moon roof in a 2012 Toyota RAV4?

If your car is equipped with a moon roof (not all have it – it’s optional equipment), you can use this to vent the cabin, or to let in fresh air and light when you don’t want to use the...

Q: Fuel Rail System Error Code

Considering that the code is related to a problem in the fuel system, you should leave it to the professionals to avoid personal injury. When fueling the car, check twice to make sure the fuel cap is fastened properly. Low...

Q: Q: Burning oil

I am not sure how adding oil can increase your compression. However, if two of the cylinders are producing 25psi less than the other two, I would consider this to be a piston ring issue. This would involve a complete...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...