The abs and the esp and esp off lights are showing on the...


The abs and the esp and esp off lights are showing on the dash and wont shut off we just put brakes hubs and barrings on it 2015 mit mirage Mechanic's Assistant: Has the light been on for some time? No just since the repa...

The abs and the esp and esp off lights are showing on the dash and wont shut off we just put brakes hubs and barrings on it 2015 mit mirage Mechanic's Assistant: Has the light been on for some time? No just since the repairs we thought we put the berrings in. Ŵrong so he flipped them around and and there still on Mechanic's Assistant: Are you fixing your Mirage yourself? What have you tried so far? Yes unplugging the battery i had a obd automend sensor plugged into it Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Before working on the car the obd showed these issues but no lights were on

Automotive Expert
Thanks for using JustAnswer.com! My name is \*\*\*\*\* \*\*\*\*\* I'll try to answer your car questions. I'll start off with some basic checks to do, then we can get into more advanced diagnostics if needed. Let me know if any questions come up, or if there is anything I can do to help! You can update this message at anytime. - I'm sorry to hear about any troubles with the vehicle, but would be glad to try and help! - There might be an issue with the new parts that were installed, or an issue with one of the sensors or wiring to abs/esp module. If not already done, recommend checking for trouble codes setting in all of the modules. Recommend snap on/,mac tools type scanner to be able to communicate with abs/esp module. List any codes youre seeing and I'll look up diag/repair information. System may need to be reset since recent repairs, if scan tool isn't available, try resetting by disconnecting both battery cables and touching the cable ends together for 2 minutes. If lights are still on at that time, continue with scan tool diagnosis and verify correct input from each of the wheel speed sensors. - Lemme know what youre seeing, or if any questions come up while checking things out!

Ok I dont have a scanner
Automotive Expert
No worries, you can update message at anytime and I'll get back to you asap! Would stop by local shop and see if they'll pull codes for you. List any that youre seeing and we'll see which one of the sensors is acting up. Would double check all fuses in all fuse boxes with key on, in the meantime, double check fluid level and look for obvious damage to wheel speed sensors and wire harness. Lemme know if there's anything I can do to help, and thanks again for using JustAnswer.com!

Thank you very much I will try to get these things soon
Automotive Expert
Hello, sorry for delay, just now seeing your message. Hoping that info helps figure out what's going on with the car. Lemme know how it goes, or if any questions come up while getting things checked out! You can update this message at anytime, and I'll get back to you asap! Thanks again for using JustAnswer.com!

What others are asking

All kinds of problems with the electronics
This problem could be related to the immobilizer function of the alarm system, or could be related to the engine or vehicle ground circuits. If the Check Engine Light is illuminated, a local mechanic with an advanced scan tool (like...
Does a Cracked Mirror Need to Be Completely Replaced?
To determine if a cracked mirror (https://www.yourmechanic.com/article/do-i-need-to-entirely-replace-a-cracked-mirror) needs to be completely replaced will depend on a few factors. Let's start with the interior mirror, or what is typically called the rear-view mirror (Https://www.yourmechanic.com/services/rearview-mirror-replacement). Generally this mirror is only replaceable as...
Car won't start after battery replaced
Engine starting on a hybrid is more complicated than a gasoline car. The starter is also the alternator and a drive motor. It is located in the bell housing in between the engine and transmission. There’s a lot more computer...
Anti-Skid Brake Service Required
This message comes up when the computer detects a problem that will keep it from properly controlling this system. Most of the time, it is caused by a failure in the steering angle sensor or a wheel speed sensor. I...
Rear differential leak
Hello. A rear differential leak is something that requires immediate attention. If the fluid continues to leak, it could cause the gears inside the differential to start rubbing metal to metal. This will cause premature failure of the differential. It...
Fixing seat belts that don't retract well
Those things are just ratcheting devices. When you pull them up, there is no ratchet inside and it goes "click, click, click." Then, when you slam on the brakes, they've got a little swing with a little pendulum. When they...
What will cause an automatic transmission not to shift into the final drive gear? 1993 Buick LeSabre
Hi - by "won't shift into the highest gear", I interpret this to mean the lock-up of the torque converter, which effectively is another gear (eliminates any slip through the torque converter). Your symptoms suggest that the transmission is not...
Car is hard to stop, surges forward in drive, and kicks when coming to a stop
Hi There, It sounds like you may have a dirty or failing idle air control valve causing your engine idle to fluctuate. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) is a small valve on the engine's intake system that reads the...
High RPM but Slow acceleration
Hi Giovanni, Thank you for contacting us. We understand that you think it's the CAT. However, form our end we cannot state that with 100% certainty. Is it possible that a clogged up CAT is the source of the high...