Q: looking for ecu pinout for 2005 pontiac vibe for remote start tach signal

If your remote transmitter battery dies, it will need to be replaced. You can do it by following these steps: 1. Use a small Phillips-head screwdriver to unscrew the remote transmitter case. 2. Open up the transmitter keypad. 3. Carefully...

If your car is making a high pitched noise and having air conditioning problems, that may be a sign that there may be a problem with the blower motor, or perhaps blend door actuator. I would recommend having a professional...

Hi. There are a few things to check out when receiving this code as it doesn't always mean the catalytic converter is going bad. The car has multiple oxygen sensors that test how efficient the converter is performing. If the...

I learned from my grandfather who was a mechanic. I started when I was 14, but he wouldn't teach me anything, he'd only let me watch. Over time I practiced and figured things out myself. Today, you can learn a...

There is a technical bulletin to reprogram the power train control module for your specific vehicle. The bulletin number is 13-1-15. Contact your local dealer to diagnose the warning light being on and they will also be able to reprogram...

This can be caused by a number of things, such as low coolant levels, a faulty thermostat, or a failing coolant fan switch. As you may know, the coolant fan switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) helps to maintain the proper coolant temperature by...

This may be a result of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or potentially a faulty transmission control module. A faulty transmission control module may cause a delay in acceleration or erratic shifting of gears. The transmission control module has various sensors...

Hi there. Check the resistance on the throttle position sensor on the throttle body and the throttle pedal position sensor (https://www.yourmechanic.com/services/throttle-accelerator-pedal-position-sensor-replacement) on the gas pedal. There should be a resistance on the sensors. If one or both sensors have no...

Hello There, What you are describing is an indication of a faulty fuel tank sending unit. The fuel tank sending unit is a small float type component (or sensor) inside your fuel tank that measures the level of the fuel...