Q: Just changed oil,how do you make change oil light go away?

asked by on

Light still reads change oil

My car has 82000 miles.
My car has an automatic transmission.

To reset the oil change reminder light on your vehicle: Turn the ignition key to the run position, do not start the vehicle. Press the gas pedal fully 3 times within 10 seconds. Turn the ignition to the off position. Wait 10 seconds and start the vehicle. If the oil change reminder comes back, repeat the steps.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Just changed oil,how do you make change oil light go away?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Rear differential noise.

Sounds like you need to take it back to the shop where you had it changed. First you want to be sure it has enough of the correct oil. If it turns out it is properly filled, it may be...

Q: New plugs and new battery but it won't turn over

Hi Diamond. Thanks for contacting us today - and our first for 2018! If you turn the key of your Mazda and the starter will not engage, but you have power to accessories like lights, radio and such, then the...

Q: Upgrade 4 barrel carburetor - 1989 Jeep Grand Wagoneer

I believe your Wagoneer has a "bimetallic choke coil" choke coil actuator (non-electric), so, you would have to add an electrical source that is "hot" when the ignition key is in the Start or Run position. Some Wagoneer models came...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...