Jeep grand Cherokee key fob will start vehicle but won't ...


Jeep grand Cherokee key fob will start vehicle but won't release fob when i try to shut jeep off 2009 model Mechanic's Assistant: Have you checked the fob's battery? No I didn't Mechanic's Assistant: Are you fixin...

Jeep grand Cherokee key fob will start vehicle but won't release fob when i try to shut jeep off 2009 model Mechanic's Assistant: Have you checked the fob's battery? No I didn't Mechanic's Assistant: Are you fixing your Grand Cherokee yourself? What have you tried so far? Replaced main battery because keep has been staying in ignition over nite if I can't get it out before I go to bed ? Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No I just answered. His question

Automotive Expert
Welcome to JustAnswer. Thank you for contacting us for assistance with your vehicle. I'm Pete. I will be happy to assist you with your question. May I ask to whom I have the pleasure of speaking with today?
Automotive Expert
I'm sorry to hear you are having this problem. I know this can be frustrating. Without knowing all of the information like the vehicle history, the components that have been tested or replaced, and the results of any tests that need to be run, I can only give you a general answer to your question. The fault you have described can be caused by low voltage due to a weak vehicle battery or an issue with the battery cables being loose or corroded in any way. This issue can also be caused by the shifter to where it is not sending a signal to the computer that it is in the park position. I recommend having the battery and battery cables checked for any issues. If a fault is found it will need to be repaired. If the battery and cables are checked and found to be o.k. and in order to determine if the shifter has an issue or if anything else is causing this fault what needs to be done is to have a fully compatible scan tool plugged into your vehicle's data port that can read all of the computers in your vehicle to see if any fault codes are stored with this issue. Once this has been done, any codes that come up can then be diagnosed to help pinpoint and repair this issue. This will require the use of a high-end scan tool that can read all of your vehicle's computers. If you do not have a scan tool to check the fault codes yourself a shop or dealer can check the fault codes as well as diagnose the issue for about a 1-hour labor charge ( around $100 ). The cost to repair the problem varies as it depends on which component has failed that requires repair or replacement.
Automotive Expert
Glad I could be of some help! I hope everything works out well for you! If there are any additional questions on this issue that should arise, please feel free to reply and ask! Thank you for choosing Just Answer for your questions. Have a great day!

What others are asking

How do I use the panic alarm?
The panic alarm is an important safety feature that can draw attention to you if you feel threatened or in a dangerous situation. To use the panic alarm, simply press the Panic button on the remote entry transmitter. The alarm...
Car idles fast when stopping.
Hi there: It looks like you've inspected all the normal suspects of a high engine idle situation. One issue that pops up occasionally; especially on early 2000 period cars, trucks and SUV's is due to a faulty radiator coolant temperature...
Alternator or Battery is not Charging
The first thing is that disconnecting the battery cable when the engine is running can damage the alternator and computer modules on the vehicle. This will cause voltage spikes that will burn electrical circuits out. With the description of the...
P1127 ETCS Actuator Power Source Circuit Malfunction
Hi there. There are probably more blown fuses than just the two you mentioned. That particular code generally means that the throttle motor circuit has no power available. I suggest checking all the fuses and replacing as necessary; this includes...
What do i do if i put brake fluid in the power steering?
The fluids are incompatible and brake fluid could damage the pump and rack. If you haven't driven the car yet, or even turned it on, drain the reservoir by removing one of the lines from the bottom. Thoroughly and repeatedly...
I have a problem with my trunk on a Toyota Avalon 1998 I can't open it from the Handel in the fron or with the key what can I do
Hi there. There are a few things that might be causing this problem, from a damaged cable, actuator or even the lock itself being frozen or damaged. The best way to know for sure and to have the door unlocked...
Need to install new wiper switch on my 1966 chevelle SS
Hi Charles. Thanks for the question today. If I recall correctly, the wiper switch on the driver side of the dash does require removal of the dash, as I don't think you can access it from behind the firewall. It's...
Loss of power while driving
Based upon the symptoms you are describing, it sounds like you may have a faulty camshaft position sensor. The camshaft position sensor is a magnetic sensor that monitors camshaft speed to regulate ignition timing and fuel injection timing. It gathers...