Q: Q: How do I use the panic alarm?

asked by on

How do I use the panic alarm?

The panic alarm is an important safety feature that can draw attention to you if you feel threatened or in a dangerous situation. To use the panic alarm, simply press the Panic button on the remote entry transmitter. The alarm will turn off when you press the button again, or when you turn the ignition on.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I use the panic alarm?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the remote keyless entry (RKE) system to pop the trunk?

The remote keyless entry (RKE) transmitter allows you to open your trunk very easily. To do so, simply press the button on the RKE transmitter that looks like a car with its trunk popped. Hold the button briefly, and the...

Q: Bad ball joints and wheel bearings

Depending on the severity of this, you should be fine making the drive. Generally, when either the ball joints or wheel bearings catastrophically fail, there is ample warning and plenty of symptoms ahead of time. I would agree with what...

Q: Q: How do I empty the ashtray?

The ashtray is located directly in front of the shift lever. To access it, pull the lid out to open. The ashtray can then be pulled straight out until it is removed from the vehicle, at which point it can...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...