Q: Is it possible to swap a Jeep Cherokee engine v8 into a 2003 Ford explorer?

asked by on

Is it possible to put a 1998 Jeep Cherokee engine into a 2003 Ford explorer

My car has 172000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Is it possible to swap a Jeep Cherokee engine v8 into a 2003 Ford explorer?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: can a transmission suddenly stop working without warning??

Unless you have proof that the previous owner had the vehicle in for transmission problems before then it would be hard to prove anything. A vehicle may sit for a while and then start having problems also. The transmission will...

Q: Oil pressure fluctuating and clicking noise from engine.

Hi there. The noise seems to be a lifter tap. Either a lifter is stuck or there is no oil to the lifter causing the rocker arm to tap and creating the noise you are hearing. Try putting one quart...

Q: Why would my Durango increase RPMS while slowing down?

It sounds like you may have a dirty or failing idle air control valve. The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...