Q: If my 09 Ford Fusion only drives forward and not backwards what should I do

asked by on

My car only drives forward not backwards what should I do
My car has an automatic transmission.

Hi Cinco. Thanks for contacting us today. In most cases, when you have forward gears working but no reverse in an automatic transmission, it’s an indication of a failed reverse gear. This will require an inspection from a professional transmission specialist to verify and to determine the correct repair solution.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. If my 09 Ford Fusion only drives forward and not backwards what should I do

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the Anti-theft light mean on the dash?

Your car comes standard with a handy Anti-theft system called SecuriLock®. When you lock the doors and activate the Anti-theft system, the light will show in the dash. It should flash slowly, which indicates that the system is operating normally....

Q: 2009 2.7 charger leaking cooling replaced lower radiator hose thermastat and housing still leaking under thermastat

It sounds like you may have a bad gasket that may not have sealed correctly at the thermostat housing or potentially a small crack in the housing itself. I would suggest having a professional from Yourmechanic come to your location...

Q: Tie rods

The tie rods used on the rear wheel drive version versus the four wheel drive version of the truck are completely different. Insofar as the axle, the cataloging shows a difference in tie rod, depending on whether the axle is...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.