Q: My driver side wheel on my car will not move at all.

asked by on

My driver side wheel on my car will not move at all

My car has 83765 miles.
My car has an automatic transmission.

Hi there. Check the brakes and see if they are locked on the driver side. If the brakes are free, then raise up the vehicle and try to move the wheel by hand. If the wheel is lock up, then the wheel bearing could be frozen and locked up. If the wheel bearing is good but the wheel still will not move, then the transmission could have burned up the making the wheel lock. If you need further assistance with your driver front wheel being locked up, then seek out a professional, such as one from Your Mechanic, to help you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My driver side wheel on my car will not move at all.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: No trailer running lights

Hello. The trailer could be wired wrong. It also could be a blown fuse or relay. There is a running light fuse under the hood and a relay behind the rear bumper. Either one being blown will cause your issue....

Q: Grinding noise while driving and turning right.

The origin of the noise should be apparent to a mechanic once he or she road tests the vehicle. If not, installing remote wireless chassis ears at a few key spots in the front end will pinpoint the origin of...

Q: Vehicle stalling when stopping or turning.

Hi. As for the grinding, I believe you should have your brakes inspected. If the engine stalls and will not restart, that is the best time to see what the engine is missing to run properly. I find it strange...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.