Q: I replaced the fuel pump on my 2010hyundai accent it came on for a second then nothing. What could be the problem?

If you are burning oil and you have a noise in the engine, then you need to have the noise checked to see if it is coming from a piston. You may also have valve problems and oil getting through...

Hello. In order to properly replace the headlights (https://www.yourmechanic.com/article/how-to-replace-a-headlight-that-has-burned-out), the front bumper must be removed. Several of the bolts are hidden behind the bumper, so in order to fully remove it, this must be removed also. If you want to...

Hi and thanks for contacting YourMechanic. Check the manifold absolute pressure (MAP) sensor for any corrosion or burned pins. This is what the P0107 code (https://www.yourmechanic.com/article/-p0107-obd-ii-trouble-code-manifold-air-pressure-map-barometric-pressure-sensor-circuit-low-voltage-input-problem-by-john-nelson) is coming up for. Check for power to the sensor. Back probe the wires...

If your ignition key is the fob style key where the key insert flips out or you have push button start, it may be as simple as a dead battery in the key fob. If you have a key for...

Hi there. It sounds like you have several concerns with the vehicle; we'll stick to the first one that was mentioned. It sounds like there could be an internal fault in the transmission; whether this is a mechanical or electrical,...

Mike, we are happy to clarify. VVT (variable valve timing) is a general term for the system that keeps timing of the valves, and is typically designed to work with the camshaft. A VCT (variable cam timing) can be considered...

Hi There, It depends on the maintenance history of the vehicle. If this is a vehicle that has been regularly maintained with relatively no issues, an inspection may not be necessary, however this is more of a judgement call. An...

You will need to have the steering system scanned and reset the steering angle using an scanner that has the capability to do the programming of the new steering rack to the computer.

It is very possible that your engine could be burning oil. This could explain why it's running bad as the engine would be getting too much "fuel". This will cause the engine to run roughly as the air/fuel ratio is...