Q: I put a new engine, new fuses and a new battery why wont my car still not start

Besides the MAP sensor code, you may have a transmission major failure or a problem with the shift cable (https://www.yourmechanic.com/parts/automatic-transmission-shift-cable). The shift cable bushings wear out and these vehicles sometimes the cable will pop off of the shift linkage of...

A few different faults can cause this sort of malfunction. The most likely would be the ABS control module, traction control sensor failure, traction control module, or a wiring fault. Any of these issues are causing the car's computer to...

Hello. There could be a problem with the coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement). I would also suspect that there could be a problem with the ignition control unit. The fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) could also be contributing to the problem you are...

Hey there. Any number of electronic control modules or sensors can contribute to the vehicle stalling and/or not starting. Th crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) tells the engine control unit to power up the fuel pump and ignition system when it senses...

Hi there. Check the fuel pump to the vehicle. A lot of Camry's have this issue and all of them had their fuel pump replaced. There is a short that appears in the fuel pump wiring in the fuel tank...

There shouldn't be any dangerous materials in the AC system. But it is possible that you have a buildup of dust or even mold. Your car has a cabin air filter that is supposed to keep anything out of the...

Hello. It is common for the rear main seal to leak on this engine. Over time the seal fails and this occurs. You will need to take this to a shop that can remove the transmission to change the seal...

Hi there. The best thing that you could do is remove the filter from the vehicle and take the filter to a local parts store and have them match up the filter with a different filter.

The U1000 code is the focus of a Nissan Technical Service Bulletin (TSB) and thus the applicability of that TSB should be considered first. With multiple codes and some implicating controllers and basic CAN functions (U1000), the Factory Service Manual...