Skip the auto shop - Our mechanics make house calls

Q: I have a secon generation Honda FIT 2009 model. Which fluid should i use for my transmission CVT or ATF?

asked by on

I have a secon generation Honda FIT 2009 model. Which fluid should i use for my transmission CVT or ATF?
My car has an automatic transmission.

A: You should use Honda ATF-Z1 fluid. This is ...

You should use Honda ATF-Z1 fluid. This is supposed to be the correct fluid for all vehicles 2010 and older.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Strange whirring noise coming from the engine

It sounds like you are getting water built up inside the evaporator housing and need to unplug the A/C drain or you will flood the evaporator, blower motor, and resistor with water and short the motor and resistor again. If...

Q: Car makes noise while idling

A vehicle may make noise when idling for a variety of reasons. A problem with a belt will usually be revealed by a squeaking or screeching type of noise. Closer inspection of the noise by a knowledgable technician, such as...

Q: Power steering

This may be related to a failing power steering pump or low power steering fluid levels. As you may know, the power steering system uses a pump, normally driven by a belt. The pump supplies pressure as it is turned...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...