Q: How do you use the rear cup holder and armrest?

asked by on

How do you use the rear cup holder and armrest?

While your car has two cup holders in the front, it also offers two in the back seat. There’s also a center armrest that can be used. Here’s what you need to know:

  1. Slide your fingers into the recess at the top of the middle rear seat where the armrest folds up.

  2. Pull the armrest and cup holder down.

  3. Raise it back when you’re done or when you need to use the center seat.

Tip

Using the rear armrest and cup holder will make the center seat unusable for passengers.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do you use the rear cup holder and armrest?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the AdvanceTrac® Off light mean in the dash?

The AdvanceTrac® system is Ford’s stability and traction control solution for your car. It’s automatically turned on every time you start the engine. The system is designed to help provide better traction during driving on slippery roads (rain, snow, etc.)....

Q: Q: How do I remove a rear head restraint?

The rear outboard head restraints can be removed. To do so, first fold the restraint down by pulling on the fold strap. Then press both Release buttons on the base of the restraint, and pull the restraint straight up.

Q: There is oil leakage in little drops from radiator its kind of water mixed and light brown colour

The transmission has cooler lines that run into the radiator. The radiator has a built-in cooler for the transmission. If the cooler leaks into the coolant, it will cause a milky brown looking fluid. You should have the cooling system...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.