Q: How do I use the windshield wiper mist feature?

asked by on

How do I use the windshield wiper mist feature?

The mist feature provides visibility when you drive through a temporary patch of wetness, such as mist. When the mist feature is turned on, the windshield wipers will run one time, and then stop. To turn on the mist feature, pull up on the wiper lever, and immediately release.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the windshield wiper mist feature?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I accelerate when using cruise control?

If you are using the cruise control system, but need to accelerate, you can do so without canceling the cruise control. The cruise control will be canceled if you use the brake pedal, but not if you use the gas...

Q: Even after jumpstart car won't start. Help!

Do you know the condition of the battery? Sometimes a battery can be so bad that it will not allow the vehicle to jump start. If the battery is known to be good the next likely culprit for your concern...

Q: What if I can’t shift out of park?

Like all modern cars, yours is equipped with a shift interlock system that’s designed to prevent the car from being put into gear if the brake lights aren’t working. If the brake light switch fails, the lock will activate and...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.