Skip the auto shop - Our mechanics make house calls

Q: How do I use the Timer setting?

asked by on

How do I use the Timer setting?

A: The Timer setting in the driver information...

The Timer setting in the driver information center (DIC) allows you to set a timer while you are driving. To access the Timer setting, press the Menu button on the turn signal lever until the DIC displays Trip/Fuel Information, then use the arrows on the turn signal lever to scroll to Timer. Once the timer is displayed on the DIC, press the Set/Clr button on the turn signal lever to start the timer. Press the Set/Clr button at any point to pause the timer, and press and hold the Set/Clr button to restart the timer. The timer can record up to 99 hours, 59 minutes, and 59 seconds, at which point it will reset and start over. The timer will not run when the ignition is not on, but it will pick up where it left off when you turn the vehicle off and turn it back on.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I delete a paired phone?

If you would like to delete a paired phone from your Bluetooth system, you can do so very easily: 1. Press the Setup button. 2. Rotate the Volume knob to Phone, then press the Enter button. 3. Rotate the Volume...

Q: What else can it be besides the fuel pump, relay, and fuel filter if my tahoe putts

The check engine light means the ECM has stored a code in memory. The code may be indicating the problem causing the problem you are having. The problem sounds like you are having an issue with the fuel control, such...

Q: Car overheating.

You would have to start with checking the coolant level. If it is low, you would have to pressure test it to find out where it is leaking. If it is not low you could either have a circulation or...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.