Q: How do I use the map lights?

asked by on January 07, 2016

How do I use the map lights?

The map lights are located on the ceiling, in between the driver and front passenger seats. Each of the two lights is turned on by pressing the lens. The lights are turned off the same way.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car has problems starting.
This code means that there is a configuration problem with your instrument cluster module. This could mean that the instrument cluster module was not reprogrammed after installation. I would contact the shop where you had the work done and ask...
Car dead in driveway.
Hello, With all the parts that were replaced it hard to say what is causing not to run. There are many control unit on cars now that need to be programmed or they won't work correctly. You're probably going to...
What does the passenger airbag off Warning Light mean?
The passenger airbag off Warning Light is located on your instrument panel. This light illuminates when the vehicle has detected that the front passenger seat is unoccupied, or occupied by a small child. When the light is on, the front...
Parking sensor causing false beeps
Is the sensor totally pushed in and hanging by the wires or pushed in a little? Either way you have to determine which parts are damaged: the sensor itself, the bezel for it or the bumper. The sensor and bezel...
VSC Off, VSC Trac and check engine lights on
It sounds like you may have a vacuum leak somewhere that is causing the EVAP system to have a leak, therefore affecting power to some of the traction control parts. Traction control systems can often use vacuum assisted parts to...
Glow light flashes always
The glow plug Warning Light on your vehicle not only indicates that the glow plugs are operating, but also acts as a malfunction indicator lamp (MIL) for the engine management system. An on-site diagnosis will be required by a mechanic...
The battery light is showing on the dashboard
This may be a sign of a weak battery, a failing voltage regulator or failing alternator. As you may know, the alternator is responsible for charging the battery while the engine runs by generating amperage and recharging the battery while...
My latch hood is broken
Hi there. It is common for the hood latch cable to brake at the lever inside of the vehicle. First, you should check and see if it is connected to the latch. If it is connected then the hood latch...
What does the "Ready" blinking light on the dash mean on a sonata hybrid 2011?
Hi there. This warning light on a hybrid indicates an electrical glitch or error code has been triggered and stored in the ECU of your Hyundai Sonata. Sometimes it can occur after replacing a battery or battery cables. The solution...

Related articles

A Buyer’s Guide to the 2012 Smart ForTwo
Whether Whether you’re won over by the European charm, or you just want a vehicle that will make parking so much easier, you just might enjoy the 2012 Smart ForTwo. However, just be prepared that as the name suggests, this...
The Best Used Cars to Buy If You're On a Budget
If If you’re on a budget and need to purchase a car it can feel as though it’s slim pickings. Thankfully, there are plenty of great options available even to those on a tight budget. Let’s take a look. The...
The Best Used Cars to Buy If You’re an Interior Designer
As As an interior designer, you need to transport a great many different items, including fabric, paint and wallpaper samples and sometimes even furniture items. You probably don’t handle overly large loads very often, and when you have to, you’ll...